• MAC Address – The node's MAC address.

• Port – Port through which the node has been learned, that is, the port through which frames are received from this entry.

• Status – Describes how the node entry was added to the list, and indicates status:

  • Learned – The entry was automatically learned.

  • Self – The entry is a WSD Pro port.

  • Mgmt – The entry is a static node manually entered using the Edit button.

  • Other – Node status cannot be described by one of the above.

To make a new entry in the Forwarding Table:

1. From the Bridge menu, choose Global Forwarding Table.
   The Global Forwarding Table opens.
2. In the Global Forwarding Table, click .
   The Global Forwarding Table Insert window opens.
3. In the Unit ID field, enter the MAC address.
4. In the Select Port Number field, enter the port number.
5. In the Static Status field, choose a status:
   • Permanent – The entry will remain in the table despite power loss or system reset.
     
   • Delete On Reset – The entry will be deleted on the next Reset.
6. Click .
   The Global Forwarding Table Insert window closes.
7. In the Global Forwarding Table window, click .

1. From the Bridge menu, choose Global Forwarding Table.
   The Global Forwarding Table opens.
2. In the Global Forwarding Table, select an entry to edit.
3. Click .
   The Global Forwarding Table Edit window opens.
4. In the Static Status field, choose a status.
5. Click .
   The Global Forwarding Table Edit window closes.
6. In the Global Forwarding Table window, click .