• IP Address – The IP Address is defined for a physical port or VLAN.

• IP Network Mask – The IP Network Mask is determined by your network setup.

A particular IP Address together with a particular IP Network Mask comprise an IP interface. RadWare devices will perform IP routing between all defined IP interfaces.

To configure your device as an IP router:

1. From the IP Router menu, choose Interface Parameters.
   The Interface Parameters window opens, listing current IP interfaces.
   

2. Click.
   The Interface Parameters Insert window opens.
3. From the IF Num drop down list, choose and IF Number.
   The list contains all physical interfaces and all IP VLANs. If you want a combination of physical interfaces that is not listed, use the VLAN window to define the desired combination.
4. Enter the IP Address and Network Mask as determined by your network setup.
   
5. Click to add the new IP interface.
   
6. Repeat steps 2 - 6 for all IP interfaces.
   
7. Optionally, select an interface and click to edit the ICMP and RIP parameters of the interface.
   
8. Click to send the new IP interface definitions to the device. IP routing is performed between the defined IP interfaces.